EEIT Process Engineer ID203306

Job Profile: Engineering > General Engineering
SUMMARY
Responsible for the Test Engineering Process and the attributes that can affect the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
- Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
- Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
- Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
- Ensure all process manuals and documentation are maintained properly.
- Review all 5x5 tests to ensure that they were performed and adhered to.
- Perform walkthroughs, inspections, product evaluation and testing as needed.
- Conduct NPI test evaluations.
- Prevent test escapes.
- Ensure product testing completeness and reliability.
- Update and generate documentation as required.
- Assist Project Test Engineer with test process review.
- Evaluates test probes.
- Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
- Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
- Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
- Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
- Label and stamp boards, and fill out tags.
- Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
- Ensure assemblies are properly handled and marked.
- Ensure daily logs and move/production tickets are accurately maintained.
- Follow simple, standardized and routine written directions for assigned test operations.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Typically reports to Management. Direct supervisor job title(s) typically include: Production Supervisor, Production Manager
- Job is NOT directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management).
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
EDUCATION & EXPERIENCE REQUIREMENTS
- Associates of Science in NT Electronics or Electrical Engineering or Technical Certification preferred
- Three (3) to five (5) years experience
- Or an equivalent combination of education, training or experience
工作职责：
1.参与产品设计辅助，产品性能验证，以及制造工艺研发和工业化。
2.开发新的工艺流程，针对新产品或新技术进行优化，以确保生产过程顺利进行并达到预期的性能和质量标准。
3.收集、分析生产数据，发现潜在问题并提出改进方案，以提高生产效率和产品质量。
4.持续跟踪生产过程，识别改进机会，并与其他部门合作推动改进项目的实施，以提高生产效率、降低成本和提升产品质量。
（此岗位作为技术专家组储备人才培养，产品方向）
职位要求
1. 专业要求：机械工程、机电一体化、自动化、测试仪表等相关专业硕士学位英语6级或以上，英文口语流利。
2. 熟练使用CAD 软件进行产品和工装夹具设计。
3. 熟练使用MiniTab / JMP /Excel/ Python等软件进行数据分析。
4. 对工程技术感兴趣，对工程技术基础原理有良好的理解。
5. 良好的沟通能力和团队合作精神。
6. 良好的逻辑思维与问题解决能力。