工艺工程师 Process engineer

一、Key Responsibilities 岗位职责
1.New Process & Material Development 新工艺 / 材料开发
（1）Develop new manufacturing processes, technologies and raw materials; review product drawing manufacturability (DFM, Design for Manufacturability) and propose design optimization suggestions to ensure process feasibility.
开发新工艺、新技术、新材料；审查产品图纸工艺可行性（DFM），提出设计优化建议，保障工艺可落地性。
2.Process Design & Standardization 工艺设计与标准化
（1）Design comprehensive process routes for machining (e.g., CNC, turning) and assembly, compile detailed Computer-Aided Process Planning (CAPP) including equipment selection, tooling/fixture/gauge design, and process parameter definition.
设计机加工（如CNC、数控车）及装配全流程工艺路线，编制详尽的计算机辅助工艺规程（CAPP），涵盖设备选型、工装 / 夹具 / 检具设计及工艺参数定义。
（2）Establish and maintain process
documentation: SOP, PFMEA, Control Plan, PPAP/APQP documents, inspection
guidelines, to ensure compliance with ISO/IATF standards.
建立并维护工艺文件：作业指导书（SOP）、过程失效模式分析（PFMEA）、控制计划、PPAP/APQP 文件、检验指导书，确保符合ISO/IATF 体系要求。
3.New Product Introduction (NPI) Management 新产品导入管理
（1）Lead NPI preparation: develop
processes, design tooling/fixtures, prepare engineering documents, organize
pilot runs, and resolve technical issues during trial production。
主导新产品导入（NPI）准备工作：工艺开发、工装夹具设计、工程文件编制、试产组织，解决试产阶段技术问题。
（2）Collaborate with R&D for prototype assembly (A/B/C samples), verify mold-modified parts/design change parts, and assess impacts on inter-matching processes.
协同研发完成A/B/C 样机装配，验证修模件/ 设计变更件，评估对互配工艺的影响。
4.On-Site Support & Problem-Solving 现场支持与问题解决
（1）Troubleshoot production technical/quality issues (e.g., machining over-tolerance, vibration marks, unstable dimensions) via Root Cause Analysis (RCA), 8D, Fishbone Diagram, and implement corrective/preventive actions (CAPA).
通过根本原因分析（RCA）、8D、鱼骨图等工具，解决生产现场技术/ 质量问题（如加工超差、振刀、尺寸不稳定），落地纠正/ 预防措施（CAPA）。
（2）Provide real-time technical guidance to production teams (CNC, turning centers) and assist in handling on-site process abnormalities.
为生产团队（装配、CNC、数控车车间）提供实时技术指导，协助处理现场工艺异常。
5.Process Improvement & Cost Reduction 工艺改善与降本
（1）Implement Lean Manufacturing tools (e.g., 5S, Kaizen) and lead continuous improvement projects to enhance production efficiency, product yield, and reduce costs.
运用精益生产工具（如5S、改善），主导持续改进项目，提升生产效率、产品良率并降低成本。
（2）Develop inspection/test methods for assembled components/finished products, define key process parameters and packaging solutions, and supervise implementation.
开发组件 / 整机装配后的检查 / 检测方法，制定关键工艺参数及包装方案，监督执行。
6.Stakeholder Collaboration 内外部协作
（1）Provide technical support to suppliers and customers; conduct supplier quality audits/evaluations to ensure compliance with company quality requirements.
为供应商和客户提供技术支持；开展供应商质量审核/评估，确保其符合公司质量要求。
（2）Coordinate with R&D, Quality, Procurement, and Production teams to complete new project trial production and mass production transfer.
协同研发、质量、采购、生产部门完成新项目试产及量产转移。
7.Training & Knowledge Transfer 培训与知识传递
（1）Write work instructions and train manufacturing engineers, production operators on process standards, operation skills, and quality requirements.
编写作业指导书，对制造工程师、生产操作员进行工艺标准、操作技能及质量要求培训。
二、Qualifications& Requirements 任职要求
1. Education 教育背景
（1）Bachelor’s degree or above in Mechanical Engineering, Mechanical
Manufacturing, Mechatronics, Material Forming & Control Engineering, or
related disciplines; college degree is acceptable with 2+ years of additional
relevant experience.
本科及以上学历，机械工程、机械制造、材料成型及控制工程等相关专业。
2. Work Experience 工作经验
（1）5+ years of relevant experience in
manufacturing industry, with a focus on machining (CNC, turning), die-casting,
or metal forming (forging, precision casting, MIM, cold heading).
5 年以上制造业相关工作经验，专注于机加工（CNC、数控车）、压铸或金属成型（锻造、精密浇铸、MIM、冷镦）领域优先。
（2）At least 3 years of experience in New
Product Introduction (NPI); 3+ years of experience as a machining process
engineer is preferred.
至少 3年新产品导入（NPI）经验；具备 3 年以上机加工工艺工程师经验者优先。
3.Technical Skills 专业技能
（1）Proficient in mechanical manufacturing processes: deep understanding of material science, geometric tolerances & fits, dimension chain calculation, cutting principles, and tool technology.
精通机械制造工艺：深刻理解材料学、形位公差与配合、尺寸链计算、切削原理及刀具技术
（2）Skilled in engineering software. 熟练使用工程软件。
（3）2D drawing: AutoCAD. 2D 绘图：AutoCAD
（4）3D modeling: UG/NX, SolidWorks, Pro/E/Creo (at least one proficiently).
（5）Familiar with Office/WPS for report writing and data analysis.
熟悉 Office/WPS，具备报告撰写及数据分析能力。
4. Soft Skills（软技能）
（1）Excellent problem-solving, cross-functional communication, and coordination skills; able to drive project progress across departments.
出色的问题解决、跨部门沟通及协调能力，能推动跨部门项目进展。
（2）Detail-oriented, result-driven, with strong cost awareness and quality awareness; able to work under pressure.
注重细节、结果导向，具备较强的成本意识与质量意识，能承受工作压力。
（3）Fluent in English (reading/writing); proficient in spoken English for international supplier/customer communication is a plus.
英语读写流利，具备英语口语能力，能与国外供应商/客户沟通者优先。