400-885-9898
职位描述
英文流利专用设备制造金属制品业通用设备制造
Working
Responsibilities
Components Repair
and Quality)
& Knowledge
1.
Core Process Competence
Lean Production Expertise
Systems & Tools
Responsibilities
Components Repair
- Conduct engineering evaluation on parts repair
based on inspection results and the scope of work specified in the repair
contract. - Compile repair documents and process
qualification materials to ensure compliance with the "standardized
operation" requirement in lean production. - Develop repair process documents for each project
in line with actual repair needs; simultaneously analyze the value stream
in the repair process, and identify and eliminate non-value-added wastes
such as waiting and redundant movements. - Formulate technical solutions and make decisions
during the repair process; meanwhile, optimize processes based on lean
concepts (e.g., shortening repair cycles, improving first-pass repair
rate) to reduce process costs. - Review the repair schedule to meet customer
requirements; monitor progress in real time using lean tools (e.g., kanban
management) to avoid additional costs caused by schedule delays. - Select replacement parts, consumables, and
Standard Operating Procedures (POR) for components repair; give priority
to materials with high cost-effectiveness that comply with the "zero
inventory" or "low inventory" principle of lean procurement
to reduce inventory costs. - Review the cost structure at the project level,
compare it with lean cost control targets (e.g., unit repair cost,
material waste rate targets), ensure the achievement of cost control
requirements set by the company, and formulate improvement measures in a
timely manner for over-expenditure items. - Prepare and submit repair reports to customers on
time; the reports shall include lean improvement results (e.g., repair
efficiency improvement rate, cost reduction amount) and quality compliance
status.
and Quality)
- Collaborate with the EHS department to eliminate
EHS hazards; incorporate EHS requirements into lean improvement activities
to avoid production interruption costs caused by safety issues. - Track and inspect repair quality, strictly
implement the requirements of repair documents and drawings; meanwhile,
promote lean quality tools (e.g., mistake-proofing, QC team activities) to
reduce repair rework rate and quality costs. - Promote 6S management (Sort, Set in Order, Shine,
Standardize, Sustain, Safety) in the components repair team; optimize the
layout of the work area in combination with lean on-site management
requirements to improve work efficiency. - Respond to customers' inquiries about repair
results; conduct Root Cause Analysis (RCA) for quality problems arising
during the repair process, and optimize the repair process using lean
improvement methods (e.g., PDCA cycle) to reduce quality costs (e.g.,
rework fees, customer complaint compensation fees).
- Develop development plans for team members,
including work skill improvement and certification plans; focus on
incorporating training on lean tools (e.g., Value Stream Mapping,
Single-Minute Exchange of Die, Total Productive Maintenance - TPM) to
enhance the team's lean practice capabilities. - Identify the overall performance gaps of the
team; set improvement targets through lean performance indicators (e.g.,
repair efficiency, cost control compliance rate, quality qualification
rate) to drive the improvement of team performance. - Provide timely coaching to team members; offer
guidance on difficulties in lean work (e.g., waste identification, process
optimization) to ensure the team can effectively implement lean
requirements.
- Education & Major: Bachelor's degree or above
in Mechanical Design, Mechanical Engineering, Materials, or related
majors; master's degree or professional background in industry segments is
preferred. - Work Experience: At least 1 year of working
experience in the field of process development and manufacturing; must
have successful cases of designing and implementing mass production
processes for new products from scratch (0-1); experience in leading cross-departmental
or global projects is preferred.
& Knowledge
1.
Core Process Competence
- Have an in-depth grasp of process principles, and
be capable of independently conducting root cause analysis for complex
process problems and formulating systematic solutions. - Be proficient in equipment selection, production
line layout design, and process parameter optimization; able to lead the
compilation and iteration of core documents such as Standard Operating
Procedures (SOP) and process verification plans.
Lean Production Expertise
- Master the five principles of lean production
(Value, Value Stream, Flow, Pull, Perfection); skillfully use tools such
as Value Stream Mapping (VSM), ECRS Principles (Eliminate, Combine,
Rearrange, Simplify), mistake-proofing, and motion improvement to identify
process wastes. - Master the 6σ methodology and PDCA cycle; able to
conduct data analysis using tools like Minitab, and lead lean improvement
projects to achieve goals such as Overall Equipment Efficiency (OEE)
improvement and inventory reduction. - Possess the ability to plan flexible production
line layouts; able to optimize work processes in combination with
ergonomic principles and promote the in-depth implementation of the 5S
management system.
Systems & Tools
- Familiar with quality management systems such as
ISO 9001; proficient in operating Office and ERP systems; proficiency in
tools such as CAD/UG, MES, and Minitab is preferred.
- Possess mature project management capabilities;
able to coordinate resources to advance process improvement projects and
accurately control progress and costs. - Have team coaching ability; able to train and
empower junior engineers to improve the overall process proficiency of the
team. - Be able to use English as a working language;
have fluent oral expression and professional written communication skills,
and be able to efficiently communicate with the Global Team. - Have rigorous logical thinking and strong
execution; possess innovative awareness and continuous improvement
thinking, and be able to withstand the pressure of complex projects.
- Have a strong sense of quality and safety; able
to lead risk assessment in the process link and assist EHS in improving
the safety management and control system. - Set an example in abiding by factory disciplines;
possess the ability to coordinate cross-departmental collaboration and
demonstrate team leadership.
奖金绩效
双休，五险一金，13薪+奖金，带薪年假和病假，免费班车食堂
工作地点
山海关区秦皇岛经济技术开发区东区动力路7号
热门公司推荐
- 霸王茶姬招聘
- 肯德基招聘
- 顺丰招聘
- 美团招聘
- 京东招聘
- 饿了么招聘
- 比亚迪招聘
- 中国一汽招聘
- 北京汽车招聘
- 蔚来招聘
- 东风汽车招聘
- 长城汽车招聘
- 奇瑞汽车招聘
- 理想汽车招聘
- 长鑫存储招聘
- 天江药业招聘
- 蓝月亮招聘
- 安踏招聘
- TCL招聘
- 海信招聘
- 联想招聘
- 海康威视招聘
- 宁德时代招聘
- 中兴招聘
- 新松招聘
- 京东方招聘
- 申通招聘
- 圆通招聘
- 中通招聘
- 百世物流招聘
- 德邦物流招聘
- 麦当劳招聘
- 星巴克招聘
- 海底捞招聘
- 蜜雪冰城招聘
- 瑞幸招聘
- 雀巢招聘
- 腾讯招聘
- 百度招聘
- 快手招聘
- 字节跳动招聘
- 新华网招聘
- 小米招聘
- 招商银行招聘
- 中信银行招聘
- 北京银行招聘
- 兴业银行招聘
- 交通银行招聘
- 建发集团招聘
- 中国移动招聘
- 中国联通招聘
- 中国电信招聘
- 中粮集团招聘
- 国药控股招聘
- 中广核招聘
- 中国船舶招聘
- 强生中国招聘
- 汇丰中国招聘
- 宜家招聘
- 立邦中国招聘
- 伊利招聘
- 青岛啤酒招聘
- 京港地铁招聘
- 宝马招聘
- 小鹏汽车招聘
- 华为招聘
- 特斯拉招聘
- 吉利招聘
- 奔驰招聘
- 海尔招聘
- 美的招聘
- 京东方招聘
- 施耐德电气招聘
- 德邦物流招聘
职位发布者
骆晓滨/人事经理
今日活跃立即沟通
通用电气-哈动力-南汽轮能源服务(秦皇岛)有限公司通用电气(GE)公司是世界上最大的多元化服务性公司，同时也是高质量、高科技工业和消费产品的提供者。从飞机发动机、发电设备到金融服务，从医疗造影、电视节目到工业塑料，GE公司致力于通过多项技术和服务创造更美好的生活。GE在全世界100多个国家开展业务，在全球拥有员工近30多万员工。通用电气能源（原通用电气动力系统）是一家世界一流的发电技术、能源服务和管理系统供应商。该公司拥有全球能源业最大的发电设备客户群，在发电、石油和天然气、配电和能源租赁等行业中提供设备、服务和管理等解决方案。哈尔滨动力设备股份有限公司（下称“哈动力”）是通过哈尔滨电站设备集团公司（下称“集团公司”）的重组而建立的，是中国目前历史最久规模最大的发电设备制造商。哈动力于1994年12月16日在香港证券交易所上市。哈动力及其子公司是中国最大的发电设备制造商并且是在中国唯一一家能够制造和销售三大火力发电主机和水力发电主机，从事交钥匙电力工程和服务工程的资产一体化企业。通用电气哈动力南汽轮能源服务（秦皇岛）有限公司是通用电气(中国)有限公司，哈尔滨动力设备股份有限公司和南京汽轮电机(集团)有限责任公司组建的一家合资有限公司。合资的目的是加强经济合作和技术交流，采用先进的、适用的技术和科学的管理方法，以满足中国燃气轮机生产商和客户的需求。公司将根据合资企业的经营范围，维修燃气轮机、蒸气轮机和发电机，并将促进合资双方及中国用户的经济利益。
公司主页