工艺工程师

1 New project
1）Attending discussion for new project automation solutions. 参与新项目自动化方案讨论
2）Design new station or line modification concept according to new project request, 根据新项目需要设计新站的概念或者生产改造概念
3）New line investment analysis and submit CAPEX for approve. 新生产线投资分析, 递交CAPEX报批
4）Optimizing production line process, reducing production cost, improve quality control, and improve productivity according to APS. 根据奥托立夫生产系统要求，优化生产线工艺，降低生产成本, 提高产品质量控制, 提高生产效率。
5）Do good line balance for improve productivity, 做生产线平衡, 提高生产效率
6）Layout optimization，布局优化
PFMEA Go & See for good quality control, 做PFMEA Go & See, 提高产品的质量可靠性
7）Error proof list maintenance, and check and update on line. 防错一栏表维护, 生产线实地检查, 维护优化.
8）Support AMC layer audit. 支持AMC开展分层审核
2 Process Standardization.
1）Involve the Global process Audit, and the process standardization. 参与工艺过程全球标准化的审核,和改进工作.
2）Support to One P One P. 推行Autoliv的一个产品一个标准过程.
3）MPS Audit and improve. 负责工厂的MPS审核和改进.
4）Good SMED to improve the productivity. 推行快速换模, 提高生产效率.
5）Good Line Balance to improve the productivity. 优化生产线平衡，提高生产效率
3 Trouble Shooting
1）Trouble shooting for all the quality risk and improve. 所有和产品质量有关的问题分析,改进.
2）Process and machine improve for Cate. A and NCE. 针对Cate. A 和NCE进行过程改进和设备改进.
3）Support process audit and optimize process 支持过程审核，并优化工艺过程任职要求：
1. 五年以上机械组装工艺开发及管理相关工作经验(具有气囊组装经验的优先)；Over 5 years in mechanical assembly manufacturing relevant industry for process development and management (Airbag assembly process experiences are preferred).
2. 有较强的机械设计和电气自动化应用经验（具有机械手/自动化组装设备经验的优先）（Strong mechanical design and electric control automation application experience (Robot technology experience or other automation application experiences are preferred).
3. 有较强的问题分析、项目管理和团队协调能力；Strong ability of problem analysis, projects management and coordination;
4. 能熟练运用SPC, MSA, PFMEA等质量管理工具；Good at tools of quality management such as SPC,MSA, PFMEA,